• In March 2022, the United Nations Environment Assembly (UNEA) committed to combating plastic pollution, including in marine ecosystems. To achieve this, it established Intergovernmental Negotiating Committees (INC) tasked with drafting a treaty by the end of 2024.
• Over two years, countries convened five times to reconcile differing perspectives on addressing plastic pollution. While many nations support recycling initiatives and banning specific plastics, such as India's 2022 prohibition on single-use plastics, they remain hesitant to curb overall plastic production. This resistance stems from the economic significance of plastic manufacturing in petro-states and countries with large polymer industries.
• Ahead of the most recent negotiation round in Busan, South Korea, INC-5 Chair Luis Vayas Valdivieso presented a draft "non-paper," summarizing nations' varied approaches to managing plastic production.
• However, negotiations highlighted a stark divide between countries that see plastic pollution as a waste management issue and those advocating for production cuts at the source. This gap remains unresolved

• The Ministry of Environment, Forest and Climate change, Government of India, notified the Plastic Waste Management Amendment Rules, 2021. The country is taking steps to curb littered and unmanaged plastic waste pollution.
• Since July 1, 2022, India has banned the manufacture, import, stocking, distribution, sale, and use of single-use plastic (SUP) items with low utility and high littering potential.
• India is a party to the United Nations Environment Assembly (UNEA).In all, 124 nations are party to the UNEA, and India has signed a resolution to draw up an agreement in the future that will make it legally binding for signatories to address the full life cycle of plastics, from production to disposal.

8.Way Forward

A continuation of negotiations, referred to as “INC 5.2,” is anticipated next year to seek a resolution and finalize the treaty. If adopted, the treaty would pave the way for periodic Conferences of Parties (COP) similar to climate agreements. Historical precedents show that environmental treaties often take years to negotiate, ratify, and implement. For example, the United Nations Convention on the Law of the Sea (UNCLOS) required multiple sessions over five years to finalize its instrument on marine biodiversity. Similarly, the Global Plastics Treaty negotiations may require extended discussions and adjustments before reaching a consensus

Source: DowntoEarth

RENEWABLE ENERGY

1. Context

2. Why use Renewable energy

• Today we primarily use fossil fuels to heat and power our homes and fuel our cars. 
• It’s convenient to use coal, oil, and natural gas for meeting our energy needs, but we have a limited supply of these fuels on Earth. 
• We’re using them much more rapidly than they are being created. Eventually, they will run out. 
• And because of safety concerns and waste disposal problems, the United States will retire much of its nuclear capacity by 2020. 
• In the meantime, the nation’s energy needs are expected to grow by 33 per cent during the next 20 years. 
• Renewable energy can help fill the gap
• Even if we had an unlimited supply of fossil fuels, using renewable energy is better for the environment. 
• We often call renewable energy technologies “clean” or “green” because they produce few if any pollutants. 
• Burning fossil fuels, however, sends greenhouse gases into the atmosphere, trapping the sun’s heat and contributing to global warming. 
• Climate scientists generally agree that the Earth’s average temperature has risen in the past century. 
• If this trend continues, sea levels will rise, and scientists predict that floods, heat waves, droughts, and other extreme weather conditions could occur more often. 
• Other pollutants are released into the air, soil, and water when fossil fuels are burned. 
• These pollutants take a dramatic toll on the environment—and humans. 
• Air pollution contributes to diseases like asthma. 
• Acid rain from sulfur dioxide and nitrogen oxides harms plants and fish. Nitrogen oxides also contribute to smog.
• Renewable energy will also help us develop energy independence and security. 
• Replacing some of our petroleum with fuels made from plant matter, for example, could save money and strengthen our energy security. 
• Renewable energy is plentiful, and the technologies are improving all the time. 
• There are many ways to use renewable energy. 
• Most of us already use renewable energy in our daily lives.

2.1.Hydropower 

• Hydropower is our most mature and largest source of renewable power, producing about 10 per cent of the nation’s electricity. 
• Existing hydropower capacity is about 77,000 megawatts (MW). Hydropower plants convert the energy in flowing water into electricity. 
• The most common form of hydropower uses a dam on a river to retain a large reservoir of water. Water is released through turbines to generate power.
•  “Run of the river” systems, however, divert water from the river and direct it through a pipeline to a turbine. 
• Hydropower plants produce no air emissions but can affect water quality and wildlife habitats. 

2.2.Bioenergy 

• Bioenergy is the energy derived from biomass (organic matter), such as plants. If you’ve ever burned wood in a fireplace or campfire, you’ve used bioenergy. 
• But we don’t get all of our biomass resources directly from trees or other plants. 
• Many industries, such as those involved in construction or the processing of agricultural products, can create large quantities of unused or residual biomass, which can serve as a bioenergy source. 

2.3.Geothermal Energy 

• The Earth’s core, 4,000 miles below the surface, can reach temperatures of 9000° F. 
• This heat—geothermal energy—flows outward from the core, heating the surrounding area, which can form underground reservoirs of hot water and steam. 
• These reservoirs can be tapped for a variety of uses, such as to generate electricity or heat buildings. 
• By using geothermal heat pumps (GHPs), we can even take advantage of the shallow ground’s stable temperature for heating and cooling buildings. 

2.4.Solar Energy 

• Solar technologies tap directly into the infinite power of the sun and use that energy to produce heat, light, and power.

2.5. Wind Energy 

• For hundreds of years, people have used windmills to harness the wind’s energy. 
• Today’s wind turbines, which operate differently from windmills, are a much more efficient technology. 
• Wind turbine technology may look simple: the wind spins turbine blades around a central hub; the hub is connected to a shaft, which powers a generator to make electricity. 
• However, turbines are highly sophisticated power systems that capture the wind’s energy using new blade designs or airfoils. 
• Modern, mechanical drive systems, combined with advanced generators, convert that energy into electricity. 
• Wind turbines that provide electricity to the utility grid range in size from 50 kW to 6 
• Wind energy has been the fastest growing source of energy since 1990.

2.6.Ocean Energy 

• The ocean can produce two types of energy: thermal energy from the sun’s heat, and mechanical energy from the tides and waves. 
• Ocean thermal energy can be used for many applications, including electricity generation. 
• Electricity conversion systems use either the warm surface water or boil the seawater to turn a turbine, which activates a generator. 
• The electricity conversion of both tidal and wave energy usually involves mechanical devices. 
• A dam is typically used to convert tidal energy into electricity by forcing the water through turbines and activating a generator. 
• Meanwhile, wave energy uses mechanical power to directly activate a generator or to transfer to a working fluid, water, or air, which then drives a turbine/generator.

2.7.Hydrogen 

• Hydrogen is high in energy, yet its use as a fuel produces water as the only emission. 
• Hydrogen is the universe’s most abundant element and also its simplest. 
• A hydrogen atom consists of only one proton and one electron. 
• Despite its abundance and simplicity, it doesn’t occur naturally as a gas on the Earth. 
• Today, industry produces more than 4 trillion cubic feet of hydrogen annually. 
• Most of this hydrogen is produced through a process called reforming, which involves the application of heat to separate hydrogen from carbon. Researchers are developing highly efficient, advanced reformers to produce hydrogen from natural gas for what’s called Proton Exchange Membrane fuel cells.

3. Steps were taken by the government to promote Renewable energy

The Indian renewable energy sector is the fourth most attractive renewable energy market in the world. India was ranked fourth in wind power, fifth in solar power and fourth in renewable power installed capacity, as of 2020.

3.1.Distribution of prominent renewable energy Hubs

• Rajasthan
• Gujarat
• Andhra Pradesh
• Karnataka
• Telangana
• Tamil Nadu

3.2.Steps taken

• Permitting Foreign Direct Investment (FDI) up to 100 per cent under the automatic route,
• Waiver of Inter-State Transmission System (ISTS) charges for inter-state sale of solar and wind power for projects to be commissioned by 30th June 2025,
• Declaration of trajectory for Renewable Purchase Obligation (RPO) up to the year 2022,
• Setting up of Ultra Mega Renewable Energy Parks to provide land and transmission to RE developers on a plug-and-play basis,
• Schemes such as Pradhan Mantri Kisan Urja Suraksha evam Utthaan Mahabhiyan (PM-KUSUM), Solar Rooftop Phase II, 12000 MW CPSU Scheme Phase II, etc,
• Laying of new transmission lines and creating new sub-station capacity under the Green Energy Corridor Scheme for evacuation of renewable power,
• Setting up of Project Development Cell for attracting and facilitating investments,
• Standard Bidding Guidelines for tariff-based competitive bidding process for procurement of Power from Grid Connected Solar PV and Wind Projects.